FJR Owners Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 8 of 8 Posts

·
Registered
Joined
·
95 Posts
  • Like
Reactions: Oldjeep

·
Registered
Joined
·
43 Posts
Discussion Starter · #4 ·
2007 and earlier wheels used a mechanical or notched system on the wheel for the ABS. In 2008 they updated the whole ABS system (a major improvement) and went to a magnetic ring on the wheels for the ABS system. The two are incompatible.
Now we both know! Thanks
 

·
Registered
Joined
·
43 Posts
Discussion Starter · #5 ·
bump, still looking for 2008 and up rear wheel
Thanks
 

·
Registered
2014 FJR-A
Joined
·
57 Posts
2007 and earlier wheels used a mechanical or notched system on the wheel for the ABS. In 2008 they updated the whole ABS system (a major improvement) and went to a magnetic ring on the wheels for the ABS system. The two are incompatible.

Actually, they are not completely incompatible.
The 2008 and later wheels are backward compatible with the first gen FJRs. The same shoulder is machined on all wheels from US 2004 onward. Just press the old toothed reluctor ring onto the later wheel shoulder.
The US 2004 - 2007 wheels are not forward compatible to 2008 and later, since the early wheels do not have the lugs on the hub to attach the magnetic reluctor rings retaining screws.

dan

Never put off until tomorrow what you can put off forever!!
 

·
Registered
Joined
·
43 Posts
Discussion Starter · #7 ·
Indeed, we have tuned in and made a no nonsense hubset in our UK industrial facility yet with the vast majority of the very good quality highlights of its older sibling the V6. By moving to standard course instead of extravagant Custom SKF and dividing the quantity of pawls we can cut the cost for a definitive value for money wheelset. By building the centers in huge numbers and piggybacking alot of the parts from the V6 territory, the V3 center point was conceived. Permitting us to hit forceful pricepoints unbelievable in the market even with modest Chinese center points! Worked with quality Sapim Leader spokes and metal areolas for long and tough assistance life. Most brands would sell a form of this quality for £400 and make out its the best in class, we are being straightforward revealing to you its incredible (yet clearly not as magnificent as our lead V6 territory)
What you talkin Willis?? If in you don't have a wheel for me then get off my thread!!!
 
1 - 8 of 8 Posts
Top