FJR Owners Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!

21 - 31 of 31 Posts

·
Registered
Joined
·
14 Posts
Any chance we can brush this old thread off and get this picture links off Photobucket, which doesn't allow access? Guys like me, new to the 2013, still need this info. Not to mention, there are several links to this thread out there from other forums.
 

·
Registered
Joined
·
123 Posts
Discussion Starter · #23 ·
Yeah, bummer about the pics. Here's a PDF of the whole thing - with pics.

Any chance we can brush this old thread off and get this picture links off Photobucket, which doesn't allow access? Guys like me, new to the 2013, still need this info. Not to mention, there are several links to this thread out there from other forums.
 

Attachments

·
Registered
Joined
·
18 Posts
Thank you!!!!!!!!!!!

Yeah, bummer about the pics. Here's a PDF of the whole thing - with pics.
Thank you for reposting this! I had a bad fuse on my heated gear power line, so I modified the battery cover. No more wasted time popping off the dash panel.
I am getting way too old to see the small screws on the headlight adjustment knobs! :grin2:
Ride safe................Jeff
 

·
Registered
Joined
·
1 Posts
Hello sBandit or anyone else that has performed the 2013 modification. Does anyone happen to have the pictures of where to cut the plastic piece to modify my 2013 for easier battery access? Much thanks!
 

·
Registered
Joined
·
64 Posts
Check out the original post, there are pictures that show what needs to be cut.
I did it to my 2013 and it’s so much easier to get to the battery & fuses.
 

·
Registered
Joined
·
123 Posts
Discussion Starter · #29 ·
Instructions With Pics - FJR Battery Access & '13 Mod

Check out the original post, there are pictures that show what needs to be cut.
I did it to my 2013 and it's so much easier to get to the battery & fuses.
Here ya go. The pics you want in are in the second section (PDF ATTACHED).
 

Attachments

·
Registered
Joined
·
14 Posts
Thank you, sBandit.
Today I modified the battery access panel on my 2013 FJR1300A. Your pictures and instructions were very useful.
 

·
Registered
Joined
·
1 Posts
NEW!
Applies to 2013 FJR1300

Yamaha's new inner-fairing cowling panel eliminates the need to remove the whole central cowling assembly to access battery and fuses.

A while back I wrote detailed instructions on the process to get access to the battery and fuses on the 2013 FJR1300 (HERE). At the end of it I pleaded to Yamaha to revise the design and make it retrofit for us poor buggers who bought the 2013s. Did they actually listen? I'd like to take credit, but it's more likely they listened to dealers complaining about it.

Late in the 2013 model year they replaced the right cowling part with a revised one which does not require you to loosen the far left cowling and remove the entire central cowl around instruments (which requires removal of headlight adjuster knobs) just to be able to remove the right cowling covering the battery.

I ordered the part from YamahaGenuineParts.com here in Canada. The part costs about $90 U.S. (about three million Canadian).


YAMAHA PART # 1MC-2836N-01-00

I got it today to see this marvel of design. Huh? It's the exact same thing with 2 chunks cut off (not actually cut off, but new production with the pieces not there any more).

THE RED LINES IN THE PICS ARE WHERE TO CUT TO MODIFY OLD ONE TO BE THE SAME AS THE NEW ONE​
.


I test fit it. It's a wee bit tricky to get on, but you quickly figure out how to slip the front bits under the main cowling, and pretty much carefully 'hinge' it down, pulling the side fairing out away from the bike a bit to let the panel clear. Then you just pop in two screws and two plastic rivets, and you're done! You should still practice it a couple times before having to do it on a cold, dark, wet road. But it's way better than before.

But basically, all they did was lob off a couple bits that went underneath he centre cowling including one part where the panel was screwed to the fairing at the front right corner. Without that, it still fits snug just fine.











Don't forget to transfer the metal speed nut from the old part.​

So, for those of you who would like better access, buy this part. It's the last time you'll need to crap your pants heaving against snaps firmly anchored to your precious and fragile fairing.

But for those who tools, talent, and time; or just too cheap to buy the new part, here's pics to clearly show the difference between the parts, and where to cut to make your 2013 battery cover cowling identical to the 2014 one.
Thank you. Late to the post but new to fjrs. Got a 2013 today. Attempted to install new battery. Bloody hell. Almost as bad as a VW I had that had to have the wipers removed to change a battery. Thank you
 
21 - 31 of 31 Posts
Top