FJR Owners Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 8 of 8 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Dear Friends,


At the startup this morning the following happened.
When I put the ignition on everything is fine, everything works fine.
However, when I start the engine, the two turn signal indicator lights and the highbeam indicator light come on dimly, the turn signals are also on continuously.
The headlight does not turn on, the glove box does not open and the plexi adjustment does not work.
After restarting, everything was fine.
I also made a video.
Where do I look for the problem?

Thanks Zoltán
 

·
Super Moderator
2007A, 2013A
Joined
·
9,804 Posts

Note the symptoms in the 2nd post, same as what you have
 

·
Super Moderator
2007A, 2013A
Joined
·
9,804 Posts
Thank you very much for the helpful advice and Professional drawing.
I had the problem with the S6.
I replaced the connector at S6 and S4 locations and made a direct ground cable to the battery.
Excellent work!
 
1 - 8 of 8 Posts
Top