FJR Owners Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 17 of 17 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Leaving on October 16 From Cape Cod MA to San Diego CA on my 08. I've been searching for highway pegs for while now. I've already figure out a home made one, but if there is anyone out there selling a OEM just drop a text over.

thanks
 

·
Registered
Joined
·
25 Posts
Leaving on October 16 From Cape Cod MA to San Diego CA on my 08. I've been searching for highway pegs for while now. I've already figure out a home made one, but if there is anyone out there selling a OEM just drop a text over. thanks
Leaving on October 16 From Cape Cod MA to San Diego CA on my 08. I've been searching for highway pegs for while now. I've already figure out a home made one, but if there is anyone out there selling a OEM just drop a text over.

thanks
Check out Garauld Techworks on this forum. I purchased a set and they are very nice and needed for long range riding.
Garauld Accessory Catalog
 

·
Premium Member
Joined
·
604 Posts
I’m about to sell a used set of Gerauld’s Pegs off of my ‘015. Had them on 6 months before I went with crash bars. I’ll post pics later. Still in fantastic shape.
 

·
Registered
Joined
·
1,585 Posts
I find that the reason I don't use Hwy pegs on my FJR is, because I don't have a backrest.
FJR is really not designed to be used with hwy pegs, my GL1800 was a completely opposite, with great Corbin seat and huge backrest.

However If you have engine guards you may want something like I did;
 

·
Premium Member
Joined
·
604 Posts
Here's my pegs for sale. Could use a little cleaning. Instructions and upgraded bolts too.

$70 plus shipping. I'll give it a shot here for you then put them in for sale section.


Purple Pen Writing implement Cosmetics Tool

White Automotive lighting Automotive design Automotive tire Automotive exterior
Purple Pen Writing implement Cosmetics Tool
White Automotive lighting Automotive design Automotive tire Automotive exterior
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #6 ·
I’m about to sell a used set of Gerauld’s Pegs off of my ‘015. Had them on 6 months before I went with crash bars. I’ll post pics later. Still in fantastic shape.
Here's my pegs for sale. Could use a little cleaning. Instructions and upgraded bolts too.

$70 plus shipping. I'll give it a shot here for you then put them in for sale section.


View attachment 81727
View attachment 81728 View attachment 81727 View attachment 81728
Hi Whooshka! they look neat! how do they fold? with springs or by friction? im interested. where r u located?
 

·
Premium Member
Joined
·
604 Posts
Just a friction thing. Never had one fold down once folded up. I'm in South Jersey. They'd probably fit in a $15 flat rate USPS box.
 

·
Registered
Joined
·
1 Posts
Leaving on October 16 From Cape Cod MA to San Diego CA on my 08. I've been searching for highway pegs for while now. I've already figure out a home made one, but if there is anyone out there selling a OEM just drop a text over.

thanks
In same situation realizing need after recent 1700 mi trip down south. I have 2207. Would you mind sharing your homemade solution? Would refer not adding engine guards just to mount pegs
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #11 ·
In same situation realizing need after recent 1700 mi trip down south. I have 2207. Would you mind sharing your homemade solution? Would refer not adding engine guards just to mount pegs
it's a simple and temporary solution for the ride. I would pull out the frame slider. adapt a 2" longer bolt and cover the 2" with a frame matching painted piece of pipe and a nut. It doesn't change aesthetic look and function of the original frame slider. Its just an option for leg position so needed. But as we have Garauld Accessories available here, we don't need home made stuff, do we?
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #12 ·
Just a friction thing. Never had one fold down once folded up. I'm in South Jersey. They'd probably fit in a $15 flat rate USPS box.
cool brother! can you send this item in priority next day mail? ill be leaving saturday on the 16th. how do I pay you?
 

·
Premium Member
Joined
·
604 Posts
PM sent. I'll get them to the P.O. tomorrow.
 

·
Premium Member
Joined
·
604 Posts
Sent a text as well. (y)
 
1 - 17 of 17 Posts
Top