FJR Owners Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 7 of 7 Posts

·
Registered
Joined
·
103 Posts
Discussion Starter · #1 ·
My bike had heated grips fitted when I bought it, but they are wired straight to the battery, I would like to wire them to the ignition circuit to stop anybody just walking past and fiddlin with the switch and leaving me with a flat battery. What I would like to know is the fuse rating of the grips as there is no instructions with them and as a bonus where to wire them into a live feed off the ignition circuit.

Cheers
 

·
Registered
Joined
·
1,273 Posts
@CarMan

Have a look at the wiring diagram for a relay on this article by Warchild:

http://www.fjrtech.com/getdbitem.cfm?item=46

Maybe The Viking can enlighten you further on how he did his grips.

Let's put it this way, I installed Stebel horns using this diagram and had no problem at all, me being a numpty an' all. I'm sure that you can be guided correctly by one of our many friends on this site......
 

·
Registered
Joined
·
153 Posts
Rewiring

I installed mine.

Put the control knob at the bottom on the hazard switch, an I had an led that indicates when they are on.

If ever you are insterested in having the circuit just pm me.

:wink:
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top