FJR Owners Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 6 of 6 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter · #1 ·
This is a request for images of 2003-2005 FJR with Cal-Sci windshield installed.

I'm looking for profile (full bike) and front (full bike) views.

Sharing your experience with this product would also be welcome.

Thanks.

Sandy Noble
 

·
Registered
Joined
·
41 Posts
Cal Sci

Can send images of one on an 07. I am 6ft tall and a tall back but am very please. I think mine was the taller of the products.
 

·
Registered
Joined
·
38 Posts
Cal-Scientific

I had a +4 on my 07. The protection was superior to the stock windscreen. However, I found the fit and finish lacking. The thickness of the plastic was thinner than the Rifle screen I am presently using and the machining of the edges and the two holes where the cover for the attachment screws attaches to the windscreen were rather rough.

I've said it before on this forum -- if you are looking for the best protection, go with the Rifle screen. It's no contest.
 

·
Registered
Joined
·
587 Posts
I had a +4 on my 07. The protection was superior to the stock windscreen. However, I found the fit and finish lacking. The thickness of the plastic was thinner than the Rifle screen I am presently using and the machining of the edges and the two holes where the cover for the attachment screws attaches to the windscreen were rather rough.

I've said it before on this forum -- if you are looking for the best protection, go with the Rifle screen. It's no contest.
Chaz, i'm not seeing a rifle application yet for the 2013 - is there one yet?
 

·
Registered
Joined
·
9 Posts
This is a request for images of 2003-2005 FJR with Cal-Sci windshield installed.

I'm looking for profile (full bike) and front (full bike) views.

Sharing your experience with this product would also be welcome.

Thanks.

Sandy Noble
I researched a number of websites looking for a windshield for my 2005 FJR, I almost made a mistake with my comfort, time and money by considering another national brand of windshield. Lucky for me I came upon this discussion forum and decided to order the Cal Sci "Tall" windshield as I'm 6"-1". I received it after 4 days of ordering it and it came packed with an appropriate protection a cover, chrome screws, glass cleaner and a complimentary air tire gauge. After unpacking the windshield, I noticed two cut outs just above where the windshield brackets attach to the windshield. This is perfectly normal and designed this way. However I did not notice the cut out when I ordered the windshield so I called Cal Sci to ask if I had received the correct windshield for my 2005 FJR. Mark at Cal Sci was very helpful in explaining the reason for these cut outs and encouraged me to install the windshield and take it for a ride at low and high speeds. He stated that I would experience a quite ride and no back pressure pulls to my helmet. Mark was absolutely correct, I rode at 60, 80-90 MPH which turned out to be a comfortable, quite ride. I would recommend their windshields over any other on the market.
 
1 - 6 of 6 Posts
Top