FJR Owners Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
What's up? I can't get the mod to work by following the instructions for the '04 and I notice the wires are not the same color as in the pictures for the '04 mod. Has anyone encountered a difference in the '05?
 

·
Registered
Joined
·
1 Posts
I did this mod on my 05 this weekend. Use pins 25 & 29 I believe ( whatever the 04 steps list ). The only trick is to make sure that your jumper actually contacts the pins on the processor. My resistor legs weren't quite long enough, so I had to do some trickery. If your not
getting the co option, then you jumper or resistor is not making contact with the pins. My colors didn't match exactly, either...
My bike was quite well behaved, but after this mod, a proper sync ( bottom the screw on cyl #3 and adjust all others to it ) and a throttle position sensor adjustment, the low end has a whole new feel to it. Definately worth the time.
 
1 - 2 of 2 Posts
Top