Join Date: Jan 2013
Location: Edmonton, Canada
UPDATE to SpeedoHealer on Gen 3 FJR1300
UPDATE: With the TWO SpeedoHealers installed, after a couple weeks I started getting a somewhat regular cruise error. When I would turn on the Cruise power, the yellow Cruise light on the instrument would flash and the cruise would not work. Usually, stopping and turning the engine off then starting again stopped it. But it recurred several times. I put the second (front wheel) SpeedoHealer into bypass mode and it has not happened since.
So if you are going to install a SpeedoHealer on a Gen 3, I recommend you install on REAR wheel speed circuit only. I have tested ABS and TC at low speeds and they APPEAR to me to be working fine. I still get the cruise 'dropout' once in a while, but having a deadly accurate speedo is very nice and I don't mind occasionally hitting the Set button again.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
2006 YZF-R1 50th Anniv.
1999 Ninja ZX-9R