Yamaha FJR Forum : Yamaha FJR Owners Forums - View Single Post - Gen1 ABS Test
Thread: Gen1 ABS Test
View Single Post
post #9 of (permalink) Old 07-15-2020, 04:05 AM Thread Starter
Junior Member
Training wheels fitted!
Join Date: Jul 2020
Posts: 11
So got home from work and pulled the ABS relay.
Cleaned the contacts and found a small amount of corrosion on one of the posts.

Cleaned that away with contact cleaner.

Reinstalled the relay
The relay clicks when turning on the ignition key a couple of times as the fjr intialises.
Ensured that the coupler was shorted properly

I had another crack at running the test with method one and method two.
Run the tests....nothing.
No codes no pulses and no further clicks from the relay.
Could this still mean its cactus?
I guess perhaps only part of the relay may be functioning?

A new relay will cost me $139 aud shipped.

I'm tempted to bolt the thing together and just ride it and maybe the abs will come good?

Last edited by DunJen; 07-15-2020 at 04:10 AM.
DunJen is offline  
For the best viewing experience please update your browser to Google Chrome