High-G FJR Junkie!
Join Date: Jan 2013
Location: Millgrove, ON, CA
You will have to stick to '03 to '05. Gen1 axle/wheel/caliper combo is different than Gen2/3. This applies to the lower tubes.
If upper tube bent, you have options... Gen1 tubes (don't get the Chinese ones) with original oil lock piece. You can use Gen2 upper tubes with the mating Gen2 oil lock piece. Bushings and seals are common on all Gen1 and Gen2/3A models.
Cheap set, looks like. You may be able to have local suspension shop straighten out minor bends/check runout. I don't know where you are... you don't have location in your profile.
Keep yer stick on the ice....
2014 FJR1300A - Root Beer
2009 CBF1000A - Sienna Red