Trainee Sport Tourer
Join Date: Aug 2018
Location: London, Ontario, Canada
How are you attaching it to the reservoir?
I drilled two holes in the sides of the box, turned them facing in and it is 1mm off from a perfect fit for the width of the reservoir screws.
So, I screw the box'es side panels to the resevoir first, then place the box in and screw it in.
I just took it off to try something so here is a pic of it. It is more than strong enough with one screw so I didn't attach the right side (I just screwed it only to the box), so now I only have to take off the left box side to get it off and there is no longer any gap.
Current bike: 2015 FJR1300A
Previous bike: 2014 NC750x
Last edited by lue42; 06-17-2020 at 12:34 PM.